Evans Enhance is a leading floor polish used in the most prestigious establishments. This high solids metallised product dries to an extra durable, wet look gloss finish. It is recommended for most floors including vinyl, rubber, asphalt, marble, terrazzo and sealed surfaces.
RECOMMENDED FLOOR SURFACES:
Vinyl composition tile (VCT), terrazzo, marble, concrete, quarry tile.
This UHS floor finish is formulated with a special blend of resins, waxes & polymers to provide
a long lasting, high gloss finish that can stand up to the heavy daily traffic and maintenance
that is seen in retail or institutional facilities.
INITIAL APPLICATION:
For a floor that has been stripped, properly neutralised, rinsed and allowed to dry thoroughly,
apply 5-6 thin coats of ENHANCE HD using a clean synthetic mop. Allow the floor to dry
thoroughly between coats and prior to burnishing. Drying time depends on a number of
factors. At 200C approx. 30 minutes between coats and 3 hours minimum before burnishing.
Optional: Apply 2 thin coats of SEALANT B floor sealer for old or porous floors or for high
traffic areas before applying ENHANCE HD.
ROUTINE MAINTENANCE:
• Sweep floor daily with a dust mop.
• To clean floor use a mop or automatic scrubber with a neutral cleaner.
• Restore shine as needed with CLEAN & SHINE maintenance cleaner to improve gloss and
repair polish damage or wear.
• Burnish with ultra high speed machine and pad. One pass is all that is usually required.
• When desired results can no longer be achieved by routine maintenance, strip floor using
SURE STRIP and re-apply ENHANCE HD as shown in initial application.
Product Highlights
- Solids content 25%.
- Ideal for very heavy traffic areas.
- Formulated to an ultra high solids level for extra floor protection.
- Superb levelling properties to ensure a smooth, even finish.
- Anti-slip finish for a safer working environment.
- Ultra scuff resistant, making it easier to clean and maintain.
- Superior response to high and ultra high speed burnishing.
- Coverage per 5ltr – 400/500 sq. metres for a single coat.
- Has a pH of 8.6.
Please note that chemicals are sold in case qty - 2 x 5ltr
